The BRUTT SAVER Helical Anchorage System is offering you an optimum solution. Saver is an austenitic stainless steel, Grade 1.4301 or 1.4401 - DIN EN 10088 Part 3 (1995). AISI - 304 or 316, reinforcing material that has many unique properties.

Being rolled from a plain round wire, the fins are work-hardened to a very high level whilst the core remains relatively soft. The subsequent twisting process puts the fins into tension and the core into compression. The tensile strength of the base material is more than doubled during the manufacturing process. The pronounced fins over the core make the bonding characteristics of the Saver Profile far superior to alternative standard reinforcing materials.

The Saver Profile is available in 3 mm, 4.5 mm, 6 mm, 8 mm and 10 mm. Length from 100 mm up to 10.000 mm. It is supplied in three types depending on the application. Bars without points are used in the reinforcement system. Bars with one or two points are used in the anchorage system. We can supply the material in any length and profile to meet the requirements of structural engineers and other specifiers.

Uses – The uses of the bars are both wide and varied and they can be utilised in new build and for many specialised refurbishment requirements like apartment buildings, historic buildings, bridges and many more (building materials – concrete, brick, stone, wood, air concrete and others).

The Saver Profile can be used for structural reinforcement or anchorage fixings.