Hand Support Tool B - HST B

Power Support Tool 1 - PST1

Power Support Tool 2 - PST2

Power Support Tool 3 - PST3

Pointing Gun Kit

Loading Test Unit

Hand Support Tool B - HST B

The Hand Support Tool as a guiding element for Saver Extra is designed for conventional driving with hammer force.

It is available with 4.5, 6, 8 and 10 mm diameters and in lengths of 8 to 100 cm respectively.

A special cavity in the head of the Hand Support Tools reduces the friction during rotation of Saver Extra.

Back

Power Support Tool 1

Power Support Tool 1 is equipped with a SDS tool holding fixture for standard percussion drills and hammer-drills.

Tube lengths are available from 8 to 100 cm with 6, 8 and 10 mm diameters which allow driving into the Brutt products up to a length of 150 cm.

Back

Power Support Tool 2

Power Support Tool 2 is equipped with a SDS tool holding fixture for standard percussion drills and hammer-drills.

By means of these tools, Brutt Saver Extra with 6, 8 and 10 mm diameters are driven in directly into pre-drilled openings up to lengths of 50 cm.

A special countersink drives Saver Extra up to 7 mm more deeply into the material. This enables you to close the drilling opening perfectly when completing the job.

Back

Power Support Tool 3

Power Support Tool 3 is a further development of the Power Support Tool 1 and Power Support Tool 2 solutions. It features a guiding element like in Power Support Tool 1 and a striking device like in Power Support Tool 2.

It is perfectly suitable for the processing with Saver Extra from lengths of up to 300 mm.

Back

Pointing Gun Kit

This pointing gun was designed to meet the requirements of Saver Powder.

It can be delivered with two different injection heads to enable a state-of-the-art injection of the grouting mortar into the masonry openings.

A nozzle extension with a diameter of 12 or 14mm for injecting up to a length of 1.000 mm can be delivered as an option.

Back

Loading Test Unit

With this pull test device the actual pulling forces of the inserted Brutt product can be measured to satisfy the requirements of customers and specifiers.

The measuring spectrum ranges from 0 to 4 kN.

Back