Saver Extra - Anchors with grout

1.1 Drill hole - Dimension in accordance with design (depth,       diameter of drill holes)

1.2 Holes clearance - Vacuum out the holes and flush with water -       temperature over 0°C (cohesive force)

1.3 Preparation of anchors, grout and grout gun with nozzles -       admeasurements, mixing (length of holes and Brutt anchors,       diameter of holes)

1.4 Applications of ties with grout gun and nozzle - depending upon       material and the length of tie

Saver Extra - Anchor without grout

2.1 Pilot hole depending on build material 4 – 6 mm or directly       without pilot hole.

2.2 Application with extra power driven tool.

2.3 Tools clearance