Manufactured from stainless, austenitic steel of 4.5, 6, 8, 10 mm diameters in any length from 5 cm to 1 m.

Saver Extra is fitted with two points.

Application purposes in the available structure:

+ unlimited subsequent masonry reinforcement and anchorage by    manual hammering
+ subsequent needling of double wall masonry by manual hammering
+ driving with a hammer into all types of stone, including concrete, to    stabilize and fasten by pilot-drilling with a reduced diameter
+ driving with a hammer directly into soft structures, including wood and    synthetic materials, to stabilize and fasten.

Application purposes in a new structure:

+ as masonry reinforcement
+ as a wall connector
+ as a cavity wall anchor with and without insulation fastening
+ driving with a hammer into all types of stone, including concrete, to    stabilize and fasten by pilot-drilling with a reduced diameter
+ driving with a hammer directly into soft structures, including wood and    synthetic materials, to stabilize and fasten.

The following is suitable for the professional processing of Saver Extra:

Power Support Tool 2 - PST2
Power Support Tool 3 - PST3