The procedure is:

>> Adaptable to any location
>> With low noise level
>> Disruption free

More Saver MicroPile Advantages:

Pile Stud
The patented connecting Pile Stud has been modified. The modification has been done in a way to permit a self alignment of the helix between Pile to Pile. This way it is avoiding soil destruction while driving the Pile down. It is an enormous advantage. It is keeping a uniform helical shaped guide hole in the ground which maximise the Pile loading force. Stud’s threads are galvanic-corrosion protected (Anodized Aluminium). Studs are connecting Piles together.

Self-Locking of Pile
Piles are self-locking when driven into the ground. The stud is manufactured with a right hand thread to match that of the Pile. During development a Pile was inserted and a test carried out to expose the connection points of the Pile. It could be seen that, due to the matching threads, the Piles had maintained a tight fit. This is not the case with opposing threads of stud and Pile where the connection points are loosened.

Pile with a Point / Leading Pile
The MicroPile point is easier to insert into the ground. The verticality of the Pile is maintained and aids insertion and eliminate the need for a pilot hole.

Production Traceability
During each batch of production and for each Pile, a sample of the raw material is retained and archived. In event of a claim, it is then possible to trace the production history of the Pile, when it was produced, with which material, serial number and under which production process parameters the Piles have been produced. Aluminium use is specific for aircraft and military.